Equipment Name
Bulk Bottle Depalletizer
Price From
$120,000
Description
price is now at $120,000
Late 2018 ABC Model108 Bulk Bottle Depalletizer
COMING OUT OF SERVICE APRIL 2023
DEPALLETIZER SPECIFICATIONS:
A-B-C Model “108” Automatic Bulk Depalletizer, sweep-off design. Built to A-B-C standard design and specifications.
MACHINE INCLUDES:
Heavy duty main frame with counter weighted elevator.
Elevator vertical motion frequency driven with top of pallet sensor and encoder for tool-less changeover
-between various container heights.
Easy onscreen selection for container height.
Four (4) side tier sheet containment with friction plates and dual gripper system for positive control during layer transfer.
Four (4) side automatic stabilizing mechanism that squares both primary and secondary layers.
Four (4) side container control with self-adjusting front stabilizer bar during sweep from pallet to discharge.
Allen Bradley PowerFlex 525 VFD’s.
Stainless steel stripper plate for layer transfer.
Allen Bradley CompactLogix PLC with Ethernet communication.
Modular rackless design provides easy input or output card replacement or expandability.
Allen Bradley PanelView Plus 7-1000 standard terminal (2711P-T10C21D8S) HMI for operator controls and
-machine diagnostics, main panel mounted.
SEW Eurodrive Gearmotors on base machine (3 total).
Efector photo-eyes and proximity switches with micro quick disconnect cables for easy servicing.
Automatic discharge back-up control.
Elevated red beacon fault light.
Two (2) Allen Bradley 800F emergency stop pushbuttons.
Guarding package.
Allen Bradley Guardmaster electrically interlocked door switches on access doors.
SMC manual air shut-off valve, lockable in the off position.
SMC air regulator/water eliminator.
SMC automatic air dump valve.
Solid state air pressure switch.
SMC solenoid valves.
EWON Internet modem for remote diagnostics capability.
Painted with gray machinery enamel.
Rotary style fused main machine disconnect, lockable in the off position.
One (1) hardcopy set of machine Operation/Maintenance manual and one (1) in electronic format on USB
-memory stick, to include PLC & HMI programs, Electrical and Pneumatic drawings.
Accumulation table top conveyor for layer discharge and accumulation, 13′ long x 60″ wide. Equipped with variable
-frequency drive, photoeye control and product guides for either a rear or side discharge to buyers takeaway conveyor.
110 inch load height capability (Not including 18 inch top of conveyor elevation).
Two (2) bottle sizes programming set-up and testing.
One (1) lift truck ram protection at each machine approach (2 total).
Leaning Pallet Detection.
36″ bottle discharge elevation.
One (1) driven 3 chain pallet conveyor 5′ long with VFD for soft start/stop capability, at full pallet deposit
One (1) driven 3 chain pallet conveyor 5′ long with VFD for soft start/stop capability, at full pallet staging.
One (1) 90 degree pallet transfer with VFD for soft start/stop capability, at depalletizing station.
Automatic pallet magazine stacker includes 6′ long, two chain pallet conveyor section.
Automatic top frame and layer tier sheet removal system with adjustable hopper for easy removal.
Direct/Live End Table Transfer Conveyor with Allen Bradley Powerflex VFD.
PRESSURELESS SINGLE FILER CONVEYOR SPECIFICATIONS:
GC Evans Open Top, Stainless Steel Construction Conveyor C/O the Following:
18″ HP8505 conveyor x 7′-1″ long. 5′-0″
18″ HP8505 to 24″ HP8505 Transfer x 6′-0″ long with (1) drive end.
18″ HP8505 conveyor x 1′-0″ long. 7′-0″
18″ HP8505 to 12″ HP8505 conveyor x (12) 3.25″ HP8505 conveyor x 8′-0″10′-0″ long with (2) (1) drive end and (2) jack Drives.
(Section 1 of pressure-less single filer)
(10) 3.25″ HP8505 conveyor x 9′-11″ long with (1) drive end, (2) jack drives.
(Section 2 of single filer)
(5) 3.25″ HP8505 to (1) 4.5″ HP879T conveyor x 6′-0″ long with (4) drive ends, (6) jack drives and down bottle bin.
(Section 3 of single filer.) Original Single Filer 20′-0″—-NEW 26′-0″; due to Vac. Conveyor removal and green bottles
Item 5 4.5″ HP879T conveyor x 2′-8″ 8′-3 ¾” long.
Item 6 4.5″ HP879T to 4.5″ HP879T Inline Transfer unit x 5′-0″ long with (1) drive end.
Item 7 4.5″ HP879T conveyor consisting of:
a) 22″ 2′-2 11/16″ long.
b) 30 degree curve
c) 3′-8″ long.
d) 30 degree curve
e) 0′-6″ long.
Down Container Bin and All Mounted Controls Devices
Equipment Gallery
